Hobson product guide
Mungo Product Guide: Chemical Anchors, Mechanical Anchors, Plugs, Drill Bits and Abrasives
Hobson's 13-page Mungo catalogue, showing each Mungo product with its Hobson part number and material or finish. It runs from chemical injection mortars and their accessories through mechanical anchors, lightweight plugs and insulation fixings to drill bits, chisels, cutting discs and diamond blades.
What this covers
- Chemical injection systems
- Mortar compatibility chart
- Sleeves and accessories
- PU foam and injection guns
- Mechanical anchors
- Lightweight anchors and plugs
- Drill bits and abrasives
Applies to DS500 Diamond Blade 230mm, MDC Cobra Diamond Blade, MDC Laser Beton Diamond Blade, MDC Power M Diamond Blade, MDC Viper Diamond Blade, MDG GC-Hard Grinding Disc, MPC PRO Cut Cutting Disc, MPG PRO Grind Grinding Disc, Chemical Anchor Gun & Accessory, Chemical Anchors (Chemset-Style), Anchor Hole Cleaning, Chemical Anchor Studs & Sleeves and 22 more.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Chemical: MIT-700RE pure epoxy (585ml), MIT-Hybrid Plus vinylester urethane (400ml), MIT-SE Plus vinylester (300 and 400ml) and MIT-SP polyester (300 and 400ml), plus the MVA epoxy-acrylate resin capsule for M8 to M30. MIT-SP is marked for non-cracked concrete; the other three mortars for cracked and non-cracked concrete.
- The compatibility chart: MIT700RE and MIT-Hybrid Plus are recommended for concrete; MIT-SE Plus is recommended for concrete and suitable for brick; MIT-SP is suitable for concrete and recommended for brick and lightweight concrete.
- Chemical accessories: MIT-SH nylon sleeves for hollow base material, a 1m metal sleeve, the MIT-IGH internally threaded anchor sleeve, mixers and extensions, nylon and steel brushes, a purging pump, and manual, metal, cordless and compressed air injection guns. PU foams, foam cleaner and foam dispenser guns are on the same page.
- Mechanical anchors: throughbolts with washer in zinc plated (M1T, M2), hot dip galvanised (M2F) and 316 stainless (M1TR, M2R), internally threaded bolts, HL heavy duty anchors, MCS and 316 stainless MCSR concrete screws with hex, countersunk and pan heads, the MCS-I vertical hanger, MEA and MEAR drop-in anchors with setting tools, and the MHDA hollow ceiling anchor.
- Lightweight anchors: MN, MQ Quattro and MU nylon plugs, hollow brick plugs, scaffold eyes and plugs, MQL and MB nylon frame plugs with zinc, hot dip galvanised or 316 stainless screws, hammer screws, a snaptoggle wall anchor, metal and polyamide jet plugs, and a cavity toggle.
- Insulation fixings, plugs and nails (including 304 stainless nails), and the MKS-P sample case with a large selection of Mungo products.
- Drill bits and abrasives: SDS-plus and SDS-max drill bits with 2, 3, Y and 6 cutter heads, an MFB diamond drill bit, hollow drill bits with adaptors, SDS-plus and SDS-max chisels, MPC Pro Cut cutting discs, the MPG Pro Grind and MDG GC-Hard grinding discs, and DS500 and MDC diamond blades.
Who it helps: Builders and staff looking for the right Mungo anchor, resin, plug or drill bit and its part number.
Share this document
Email it to yourself
Order the products this covers
Pick sizes and finishes on the product page, then send your list for a quote.