Galvanised · 316 Stainless
Mini Grips
About the Mini Grips
VUETRADE Mini Grips are small 1.0mm brackets for joining timber at right angles in more lightly loaded joints, fixed through pre-punched holes. 57mm, galvanised or 316 stainless, cartons of 200. Australian made.
- For heavier framing joints: See our multi grip guide.
Features
- 57mm
- For more lightly loaded joints (VUETRADE)
- Rated as a pair, with 3 VUETRADE 30 x 2.8mm connector plate nails each side through the pre-punched holes (VUETRADE technical data); galvanised nails on galvanised grips, stainless on stainless
- Exposure (VUETRADE area chart): galvanised for enclosed work and inland exterior work kept clear of fresh water, frequent wetting and drying and pool splash; on marine sites (within 1km of a sheltered coast or 10km of surf), in fresh-water contact or frequent wetting and drying, or around pools, use the 316 stainless version
- Australian made
Applications
- Right-angle timber joints with light loads
Mini Grips: sizes and finishes we supply
2 lines by finish. Pick one above for its product code and pack sizes.
| Finish | Sizes | Lines |
|---|---|---|
| Galvanised | - | 1 |
| 316 Stainless | - | 1 |
Need them in bulk?
Add the sizes you need to your quote, or send us your list and we’ll price the lot and supply it with the rest of your order. Allmat supplies Mini Grips across Adelaide and South Australia. Order ahead on 1300 03 03 63.
Browse all framing connectors