Hobson Engineering
Fastener Tools: Setting, Rivet Nut & Bolting Tools
Installation and setting tools. 9 products and 34 lines. Delivery across Adelaide and South Australia. Filter by material or finish, pick a product to see sizes, pack quantities and specs, then add what you need to a quote.
9 products
Tools to install fasteners properly
Hollow Wall Anchor Tool sets M4 to M6 hollow wall anchors; drop-in anchor setting tools are with the anchors. Rivet Nut Tools set M3 to M10 rivet nuts, with a hand kit or drill attachments. Bolting & Installation Tool covers one-side bolt tools, TC bolt outer sockets, electric torque wrenches, allthread cutters and dies.
For threaded rod, Allthread Socket Bit drives M10 and M12 rod and Allthread Outer Reamer cleans up cut ends. Wire Rope Tool has swaging tools with a built-in cutter (1.5 to 5mm) and hand wire cutters, and Cable Tie Tension Tool is listed for tie sizes 3 to 10.
Installation tools ordered in Adelaide
Installers and trades across Adelaide and South Australia can order these tools with their fasteners from Allmat. Call ahead on 1300 03 03 63 or request a quote.