Hobson did you know flyer
Hot Dip Galvanised Hardened Flat Round Washer WRHTGM: Sizes (Did You Know)
Hobson's one-page "Did You Know" flyer for its hot dip galvanised hardened flat round washer (part WRHTGM). It lists 16 bolt sizes from M10 to M100 with outside and inside diameter, thickness and pack quantity.
What this covers
- Sizes and dimensions
- Hardness
- Pack quantities
For Flat Washer.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Hardened flat round washer, hot dip galvanised, to AS 1237, hardness 35 to 41 HRC.
- 16 bolt sizes from M10 to M100, part numbers WRHTGM10 to WRHTGM100.
- Examples: M12 is 22.7mm OD, 13.5mm ID, 2.2mm thick; M24 is 44.0mm OD, 25.0mm ID, 3.4mm thick; M64 is 113.8mm OD, 70.0mm ID, 8.8mm thick.
- The largest, M100, is 175.0mm OD, 107.0mm ID and 12.4mm thick.
- Pack quantities run from 250 (M20) and 200 (M10 to M16) down to 10 for M64 and up.
- A test certificate and/or report is available for this washer.
Who it helps: Anyone choosing a hot dip galvanised hardened washer, and staff checking sizes from M10 to M100.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.