Hobson performance data
Wing SDS Countersunk Bi-Metal Screw, 10 Gauge: Performance Data
A three-page product data sheet for the DrillX Wing self-drilling countersunk screw, 10 gauge, part T4XGXCO10. It covers the bi-metal construction, dimensions, pullout values in steel, mechanical properties and installation.
What this covers
- Description and applications
- Dimensions
- Pullout values
- Mechanical properties
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Bi-metal screw: 304 stainless head and shank with a high hardness drilling point, for fastening timber to steel. Applications listed: aluminium, steel, sheet metal, plywood, timber and treated pine.
- Two parts, T4XGXCO1016038 and T4XGXCO1016050. R1000 bi-metal finish.
- Pullout working load (factor of safety 2.5 for steel included): 200N in 0.5mm G2 steel, 1,550N in 1.5mm G450, 2,500N in 2.9mm G450.
- Characteristic tensile strength 9,150N and shear strength 5,450N (not working loads); torsional strength 6.9 Nm. All values are laboratory results.
- Drive with a cordless screwdriver set at a maximum of 2,200 to 3,000 RPM with firm, steady pressure and do not over-tighten. Impact drivers are not recommended.
Who it helps: Builders fixing timber or plywood to steel framing with a countersunk, corrosion resistant screw.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.