Hobson performance data
Hex Head Flanged Self-Drilling Screw 10-16, Zinc Yellow Passivate: Product Data Sheet
Hobson's two-page product data sheet (2016) for the hex head flanged self-drilling screw, 10-16 gauge, zinc yellow passivate to AS 3566. It covers part numbers, drilling capacity, screw strengths, ultimate pull-out strength, effective lengths and installation.
What this covers
- Part numbers
- Drilling capacity
- Screw strengths
- Ultimate pull-out strength
- Effective length
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Parts T9PMYFH1016016 and T9PMYFH1016025: 10-16 x 16 and 25mm, 5/16 inch hex, packed 1,000. For fixing metal to metal.
- Drilling capacity: 0.75mm top hat batten, and steel purlin from 1.00mm to 2.40mm.
- Screw strength: tensile 11,150N, shear 6,130N, torsional 9.1Nm.
- Ultimate pull-out strength from the base plate, characteristic (95% of results expected above it) and not a working load: 1,480N in 0.75mm G550, 4,050N in 1.50mm G450, 6,580N in 2.40mm G450. The sheet says safety factors must be applied for design.
- Install with a 5/16 inch hex nut setter in a cordless screw gun at 2,200 to 3,000 RPM, with firm pressure while it drills. Do not over-tighten.
Who it helps: Builders and staff checking what thickness of steel this screw drills and holds in.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.