Hobson performance data
Bi-Metal 304 Stainless Hex Head Self-Drilling Screw 10-16 (Bi-Fix, R10): Performance Data
Hobson's two-page DRiLLX product data sheet for the Bi-Fix bi-metal flanged hex head self-drilling screw, 10-16 gauge, in 304 stainless with an R10 protective coating. It covers applications, pull-out values, a drill point test, mechanical properties, dimensions and installation.
What this covers
- Applications
- Material and finish
- Pull-out values
- Mechanical properties
- Dimensions and part numbers
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Parts T4XMXHH1016019 (10-16 x 19) and T4XMXHH1016045 (10-16 x 45), 5/16 inch hex head, packed 500.
- Bi-metal 304 stainless with an R10 protective coating (R1000 hours). Made for metal to metal fixing in corrosive conditions: cladding sheets, signs, fences and sheds.
- Working pull-out load from the steel it is fixed into, safety factor 2.5 already included: 350N in 0.7mm G2, 1,400N in 1.5mm G550, 2,600N in 2.5mm G450. Laboratory values; actual loads depend on the base material.
- Drill test: through 2.0mm G450 in no more than 4 seconds at 2,200 RPM with 18kg load.
- Use a 5/16 inch hex drive bit and a cordless screw gun at 2,200 to 3,000 RPM and firm, steady pressure while it drills. Do not over-tighten. Impact drivers are not recommended.
Who it helps: Builders fixing cladding, signs and fences in corrosive conditions.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.