Hobson performance data
6g Bugle Head Metal Tek Screw 6-20 x 30, Zinc Plated: Performance Data
Hobson's two-page DRiLLX performance data sheet for the 6 gauge, 20 TPI bugle head metal self-drilling screw in zinc plate, 30mm long (part T9PMZBP0620030). It covers applications, pull-out values, the drill point test, mechanical properties, dimensions and installation.
What this covers
- Applications
- Material and finish
- Pull-out values
- Drill point test
- Mechanical properties
- Dimensions
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- For lightweight materials and plasterboard to steel framing and ceilings, in light gauge steel frame up to 3mm.
- C1022 hardened steel, zinc plated (RoHS compliant). One size: 6-20 x 30, Phillips #2 drive, packs of 1,000.
- Pull-out working load: 200N in 0.5mm G550 plate, 450N in 1.2mm G2 and 800N in 1.6mm G550. The working loads already include factors of safety and come from laboratory tests.
- Drill point test: drills 1.5mm G450 plate in 3 seconds on average (4.5 seconds maximum) at 2,200 RPM under an 18kg load.
- Install with a cordless screwdriver set at 2,200 to 3,000 RPM, with firm, steady pressure while it drills. Do not over-tighten, and impact drivers are not recommended.
Who it helps: Plasterers and builders fixing board to light gauge steel framing.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.