Hobson data sheet
Galvanised Class 5 Hex Coupler Nut: Sizes and Proof Load Data Sheet
Hobson's one-page product data sheet for its hot dipped galvanised class 5 hex coupler (part prefix AXHC05GCM), used to join two male threads, most commonly threaded rod. It covers M10 to M36 with pitch, spanner size, length, stress area, proof load and pack quantity.
What this covers
- Properties and finish
- Thread engagement
- Sizes and dimensions
- Proof load
- Pack quantities
For Hex Coupler Nut.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Property class 5: mechanical properties and chemical composition to ISO 898-2 / AS/NZS 4291.2 for class 5 nuts. Hot dip galvanised to AS/NZS 1214.
- Each male thread must go in at least 1 x its diameter to reach these properties. The coupler is 3 x D long to allow adjustment at either end.
- Proof load, with that thread engagement: M10 34.2kN, M12 51.4kN, M20 154.4kN, M36 514.7kN.
- Seven sizes, AXHC05GCM10 (M10) to AXHC05GCM36 (M36). For example M12: 1.75mm pitch, 18mm spanner, 36mm long; M24: 3.00mm pitch, 36mm spanner, 72mm long.
- Pack quantities from 100 (M10, M12) down to 5 (M30, M36).
Who it helps: Builders and installers joining galvanised threaded rod, and staff checking sizes and pack quantities.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.