Hobson data sheet
Post Torx Button Head Barrel Nut, 304 Stainless Tamper Proof: Sizes Data Sheet
Two-page product data sheet for the 304 stainless post Torx button head barrel nut, part prefix INB04BTM. It covers uses, features, dimensions for M5 to M10, and a three-step installation guide.
What this covers
- Applications and features
- Dimensions and part numbers
- Installation
For Barrel Nut.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- An internally threaded button head nut that replaces a standard nut in timber and steel connections. The pin in the drive gives a level of security for fixings in public areas.
- Uses listed: timber connections, playground equipment, furniture, and replacing the nut on masonry fixings. It can also bridge or close a gap between two parts.
- 304 stainless steel. Drive sizes: M5 T25, M6 T30, M8 T40, M10 T45.
- Seven sizes from M5 x 10 (INB04BTM050010) to M10 x 28 (INB04BTM100028). For example M8 x 16: 17.07 to 17.50mm head, 9.70 to 9.95mm barrel, 9.50 to 11.00mm thread length.
- To fit: pass the bolt or screw through the hole, screw the barrel nut onto it, then tighten the barrel nut. The matching button screws are Hobson part IMS04BTM.
Who it helps: Builders and installers of playgrounds, park furniture and public fit-outs who need a tamper proof, matching-head fixing.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.