Hobson data sheet
Lifting Eye Bolt DIN 580, Zinc Yellow: Data Sheet with WLL by Angle
Hobson's two-page product data sheet for its zinc yellow passivated DIN 580 lifting eye bolt, grade C15E (part ULEBC5YD5M). It gives dimensions for M6 to M24, minimum ultimate tensile loads, and load-bearing capacity per eye bolt by direction of loading.
What this covers
- Dimensions
- Minimum ultimate tensile loads
- Load-bearing capacity by direction of loading
- Applications
For Lifting Eye & Point.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Approved and certified for lifting, for axial or angular loading. Grade C15E steel, zinc yellow passivate, marked CE and WLL, stamped with the axial working load.
- Sizes M6 to M24 (ULEBC5YD5M06 to ULEBC5YD5M24). Example M12: 20.5mm thread, 53mm high, 30mm inside eye, 54mm outside eye.
- Axial WLL per eye bolt (straight pull in line with the bolt): M6 75kg, M8 140kg, M10 230kg, M12 340kg, M16 700kg, M20 1,200kg, M24 1,800kg.
- Load-bearing capacity per eye bolt at an angle β of more than 0 and up to 45°: M12 240kg, M16 500kg, M24 1,290kg.
- Load-bearing capacity per eye bolt at β over 45° to 60°, or with the eye bolts fitted at the sides of the load at 0 to 45°: M12 170kg, M16 350kg, M24 900kg.
- Minimum ultimate tensile loads (failure loads, not working loads), M12: 20.0kN axial and 10.0kN transverse at 90°.
- Uses: a connection point for anchoring, rigging, pulling, lifting or hoisting, with rope, cables, shackles and hooks.
Who it helps: Riggers, fabricators and anyone choosing an eye bolt size for a lift.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.