Hobson performance data
XFOAM PRO HPU-M50 Fill Hand Expanding Foam 750ml: Technical Data
Hobson's three-page product data sheet for XFOAM PRO HPU-M50 Fill Hand, a one-component polyurethane expanding foam in a 750ml hand-held aerosol can (part MCFPUDM750). It covers uses, technical data, application instructions and storage.
What this covers
- Uses and materials
- Technical data
- Instructions
- Packaging and storage
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- General purpose polyurethane foam for filling and insulating construction openings and fitting door frames and windows. Seals against cold, draught and noise.
- Bonds to wood, concrete, aerated concrete, brick, metal, glass, aluminium and polystyrene. It does not stick to silicone, polyethylene or PTFE.
- Yield 33 to 38 litres of free foam per 750ml can. Expands 2 to 3 times after application.
- Tack free in 5 to 10 minutes, can be cut after 25 to 30 minutes, hardens in 1.5 to 5 hours depending on temperature and humidity. Hardened foam handles -40°C to +90°C.
- Use: shake hard with the valve down, fit the nozzle, wet the surfaces with water and make sure they are clean and free of dust and grease. Surface at least 5°C; best can and air temperature 20 to 25°C. Clean the nozzle straight after with XFOAM PRO Cleaner.
- Flammability class F to EN 13501-1. Low emission (GEV-EMICODE EC-1 PLUS). Thermal conductivity 0.039W/mK at 20°C.
- Keeps 18 months stored upright at 5 to 25°C.
Who it helps: Builders, plumbers and electricians filling gaps and fitting doors and windows.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.