Hobson performance data
XFOAM PRO HPU-B Foam Cleaner 500ml: Product Data and Instructions
Hobson's two-page product data sheet for XFOAM PRO HPU-B, a 500ml aerosol cleaner for fresh polyurethane foam and adhesives (part MCFPUCB500). It covers what it removes, how to clean a foam gun and surfaces, cautions and storage.
What this covers
- Applications
- Instructions
- Cautions
- Packaging and storage
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Removes fresh polyurethane foam and adhesives, plus tar, grease, oils, waxes, fresh sealants and adhesive residues. Cleans foam guns, tools and the work area.
- Degreases steel, iron, chromium, aluminium, anodised aluminium, unvarnished wood and marble.
- Hardened foam can only be removed mechanically, from the gun or other surfaces.
- Gun cleaning: screw the can onto the gun, pull the trigger to clear foam, let the cleaner sit inside for 1 to 2 minutes, then flush until clean cleaner comes out. Repeat 2 to 3 times each clean.
- Surface cleaning: use the spray cap, soak a linen cloth or plain paper and wipe, then repeat with a fresh cloth.
- Caution: it can damage lacquered or painted surfaces, textiles and plastics.
- Keeps 36 months at 5 to 25°C; higher temperatures shorten its life. Store the cans upright.
Who it helps: Anyone using expanding foam guns who needs to clean the gun, tools or fresh overspray.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.