Hobson did you know flyer
Self Drilling Vertical Rod Hangers for Steel and Timber: Sizes (Did You Know)
Hobson's two-page "Did You Know" flyer for its ConXtruct self drilling vertical hangers, all zinc plated. It covers the right angle (side) hanger for steel (MVMMSZSM), the vertical hanger for steel (MVMMSZIM100025) and the T17 vertical hanger for timber (MVWMSZIM100025), with sizes, uses and the socket to drive them.
What this covers
- Right angle hanger, steel
- Vertical hanger, steel
- Vertical hanger T17, timber
- Applications
- Installation socket
Applies to Vertical Hanger, Steel, Vertical Hanger, Timber (Type 17) and Vertical Side Hanger, Steel.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- One-piece self drilling hangers for hanging threaded rod: pipe hanging, fire protection, and electrical conduit and cable tray.
- Right angle hanger for steel: M6, M8 and M10 rod (MVMMSZSM06025, MVMMSZSM08025, MVMMSZSM10025), 14g-20 screw thread, 25mm long, 46mm overall.
- Vertical hanger for steel: M10 rod (MVMMSZIM100025), 14g-20 screw thread, 25mm thread length, 46mm overall.
- Steel hangers suit steel 1.0 to 3.0mm thick (recommended thickness).
- T17 timber hanger: M10 rod (MVWMSZIM100025), 14g-10 screw thread, 25mm thread length, 46mm overall, self drills into timber beams or joists.
- All have a 16mm AF hex and are driven with the MXSVS-SI socket (1/4" drive). Best installed with a cordless impact driver.
- Use the supplied backing nut to make sure the hanger is secure.
Who it helps: Electricians, plumbers and fire services installers hanging threaded rod from steel purlins or timber joists.
Share this document
Email it to yourself
Order the products this covers
Pick sizes and finishes on the product page, then send your list for a quote.