Hobson did you know flyer
Mungo MJP Metal Jet Plug Plasterboard Anchor: Did You Know
A one-page flyer for the Mungo MJP Jet Plug, a self drilling metal anchor for drywall, distributed by Hobson. It covers the 39, 32 and 25mm sizes, versions with a screw or a male thread, and technical loads for the MJP39.
What this covers
- Features
- Applications
- Part numbers
- Male thread version
- Technical data
Applies to Chemical Anchor Studs & Sleeves, Hollow Wall & Plasterboard Anchors and Wall Plug.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- MJP39 for single or double drywall, plasterboard and gypsum fibre board; MJP32 also for reduced cavities; MJP25 for single plasterboard and reduced cavities, where the point breaks off. Indoor use.
- Parts for 8 to 10 gauge screws: MUSMJ3901801012 (39mm), MUSMJ3201801022 (32mm), MUSMJ2501801042 (25mm), packs of 100; -S versions come with a Pozi 2 pan head screw.
- MJP39 with an external male thread: M6 (MUSMJPM01801312) and M8 (MUSMJPM01801314), with one insertion bit in each box.
- MJP39 tension loads, safety factor 3 included: 100N in 12.5mm plasterboard, 100N in lightweight concrete, 220N in gypsum with 6mm pre-drilling, 150N in gypsum fibre board and 450N in chipboard with 6mm pre-drilling (10N is about 1kg).
- Listed uses: lamps, pictures, rails, skirtings and small wall mounted shelves. A back twist lock lets the screw come out without the plug moving.
Who it helps: Fit-out trades and DIYers hanging light fixtures on plasterboard.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.
Order the products this covers
Pick sizes and finishes on the product page, then send your list for a quote.