Hobson data sheet
Class 4.6 Fascia Bolt Assembly (KBAMS): Sizes and Torque Data Sheet
Hobson's one-page product data sheet for its class 4.6 fascia bolt assemblies, part series KBAMS. It lists four assemblies in M12 and M16 with bolt, nut and washer dimensions, indicative tightening torque and bolt tension.
What this covers
- Assembly parts
- Dimensions
- Indicative tightening torque
- Installation reminder
For Fascia Bolt.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Each assembly is a property class 4.6 bolt, a washer and a class 5 nut, zinc plated (ZP) or hot dip galvanised (HDG).
- Four part numbers: KBAMSGCM120030 (M12 x 30 HDG), KBAMSZCM120030 (M12 x 30 ZP), KBAMSZCM160030 (M16 x 30 ZP) and KBAMSZCM160040 (M16 x 40 ZP).
- Indicative tightening torque: M12 HDG 28.0 N-m, M12 ZP 25.0 N-m (9,500N bolt tension); M16 ZP 62.0 N-m (17,650N bolt tension).
- The torque figures are a guide only, for use when the engineer or supplier gives no torque. They are worked out from T = P x k x D, with P at 50% of the bolt's proof load and k of 0.22 for zinc plated and 0.25 for galvanised, assuming all bearing surfaces are in full contact. The engineer should confirm the final tension and torque.
- Install square: the base of the head and the base of the nut must sit in full contact with the parts being fastened. Hole sizes to AS 4600 or as the design engineer specifies.
Who it helps: Roofers and steel builders fixing fascia, and staff matching a fascia bolt size and finish.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.