Hobson performance data
XBolt PRO Vertical Hanger Concrete Anchor M8/M10: Performance Data
A two-page Conxtruct performance data sheet for the XBolt PRO Vertical Hanger (EVXMSZ17M range), a zinc plated carbon steel screw anchor for solid concrete with a dual M8 and M10 internal thread for hanging threaded rod. It covers uses, installation parameters and design loads in 32MPa concrete.
What this covers
- Description
- Applications
- Installation parameters
- Design loads non-cracked
- Design loads cracked
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Screws into a 6mm hole and taps its own undercut; ETA approvals for cracked and non-cracked concrete (Option 1), fire resistance and seismic C1. Light to medium duty and fully removable.
- Two embedment lengths: 40mm (EVXMSZ17M100040) and 55mm (EVXMSZ17M100055). Minimum concrete thickness 100mm; minimum edge distance and spacing 35mm (40mm) or 45mm (55mm); maximum install torque 15Nm.
- Best installed with a cordless impact driver and a 13mm socket (MXSVSM10).
- Design tension loads to AS 5216 in 32MPa concrete, single anchor with no spacing effects, at 50mm or more edge distance: 3.8kN (40mm) and 5.8kN (55mm) non-cracked; 1.5kN and 3.1kN cracked. These are design loads for engineers.
- Listed uses: mechanical, electrical and pipe hangers, ceilings, HVAC, fire sprinklers and cable tray.
Who it helps: Electrical, plumbing, HVAC and sprinkler installers hanging services from concrete.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.