Hume installation guide
Evolution Complete Cavity Unit Installation Instructions
The official Hume Doors installation instructions for the Evolution Timber Complete cavity unit, the flush jamb unit with the One Touch Release System and Soft Closer built in. Part 1 covers the frame and cavity installation, Part 2 the door preparation, the one-touch hardware and the soft closer. Read it on this page or download the PDF.
What this covers
- Preparing the opening
- Installing the cavity frame
- One Touch Release System
- Soft Closer
- Hanging and adjusting the door
Key things to remember
The essentials from this guide, at a glance.
- The Complete unit bundles the One Touch Release System and Soft Closer, push the flush door and it pops out of the cavity, then closes softly.
- The pack is split in two: open only Part 1 (frame) first, and keep Part 2 sealed until the door goes in.
- Flush jamb opening width is 2 × door width + 60mm; the door finishes flush with the split jamb.
- The soft closer suits doors up to 35kg.
- Leave the temporary spacer block between the split jambs in place during cladding and tiling to prevent distortion.
Share this document
Email it to yourself
Loading…
This is the official Hume Doors document. Read it on this page or download the PDF. For the most current version, please confirm with Hume Doors. Allmat supplies the full Hume Evolution cavity range across Adelaide and South Australia , build yours and add it to a quote.