Hume installation guide
Evolution Steel (Aspire) Cavity Unit Installation Instructions
The official Hume Doors installation instructions for the Evolution Steel (Aspire) cavity sliding unit, the galvanised, termite-resistant steel-framed pocket for tiled and wet-area walls. Part 1 covers the frame and cavity installation, Part 2 the door. Read it on this page or download the PDF.
What this covers
- Preparing the opening
- Installing the steel cavity frame
- Head/track and jambs
- Preparing the door
- Hanging and adjusting the door
Key things to remember
The essentials from this guide, at a glance.
- The steel frame uses galvanised, termite-resistant posts, slats and track, suited to tiled ensuite and wet-area walls.
- The 64mm stud version suits 13mm sheeting material only.
- The pack is split in two: open only Part 1 (frame) first, and keep Part 2 sealed until the door goes in.
- Plumb the split jambs and level the head/track before fixing to the house frame, and pack under the unit if extra door clearance is needed.
Share this document
Email it to yourself
Loading…
This is the official Hume Doors document. Read it on this page or download the PDF. For the most current version, please confirm with Hume Doors. Allmat supplies the full Hume Evolution cavity range across Adelaide and South Australia , build yours and add it to a quote.