Hume installation guide
Cavity Soft Closer Fitting Instructions
The official Hume Doors fitting instructions for the Evolution cavity Soft Closer, including the retrofit procedure for an existing Hume cavity unit: removing the door, positioning the mounting plate, and fitting the soft close roller and strike plate. Read it on this page or download the PDF.
What this covers
- Components supplied
- Tools required
- Removing the door
- Fitting the soft close roller
- Strike plate position
Key things to remember
The essentials from this guide, at a glance.
- The kit contains the soft close cavity roller, strike plate and screws; you need a spanner, tape measure, Phillips driver and a drill.
- To retrofit, remove the timber pelmet and take the door out, leaving only the rear wheel assembly in the track, the old front wheel assembly is no longer used.
- The front of the mounting bracket sits 80mm from the leading edge of the door.
- The soft closer suits doors up to 35kg.
Share this document
Email it to yourself
Loading…
This is the official Hume Doors document. Read it on this page or download the PDF. For the most current version, please confirm with Hume Doors. Allmat supplies the full Hume Evolution cavity range across Adelaide and South Australia , build yours and add it to a quote.