James Hardie document
Brushed Concrete Cladding Brochure
The official James Hardie brochure for Hardie Brushed Concrete Cladding, a textured fibre cement panel that gives modern facades a softly brushed concrete look, presealed and ready to paint. It covers the embedded texture finish, panel sizes, shiplap jointing, the aluminium accessory range, joint layout options and a four-step install overview. Read it on this page or download the PDF.
What this covers
- Features & Benefits
- Design Possibilities
- Panel Sizes & Product Codes
- Aluminium Corners & Trims
- Joint Layout Options
- Installation Overview
Key things to remember
The essentials from this guide, at a glance.
- Panels are 8.5mm thick and 1200mm wide, available in four lengths: 2440, 2750, 3000 and 3600mm.
- Panels connect with shiplap joints and are typically gun-nailed, so only carpentry trades are needed for installation.
- The 8.5mm panels are compatible with a selection of Hardie 9mm aluminium accessories so different cladding panels can be mixed and matched.
- First panel is fixed with ND50 stainless steel brads at 125mm centres up to wind categories N3/C1.
- Panels are presealed and ready for a water based exterior paint.
- Deemed non-combustible and suitable for Bushfire Attack Level requirements up to BAL40.
Share this document
Email it to yourself
Need Brushed Concrete Cladding for the job in this guide?
Brushed Concrete Cladding is available to order from Allmat for builders and trade across Adelaide and South Australia, on one order with the framing, fixings and sealants the guide calls for.
Sizes and profiles are on the Brushed Concrete Cladding page.