Hobson performance data
Type 17 Pan Head Phillips Timber Screw 10-12 x 25, 304 Stainless: Performance Data
A three-page DRiLLX performance data sheet for the Type 17 pan head Phillips timber screw T04WSPP1012025 in 304 stainless steel, made for timber to timber fixing where more corrosion resistance is needed. It covers dimensions, pullout values, mechanical properties and installation.
What this covers
- Description and applications
- Dimensions
- Pullout values
- Mechanical properties
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Part T04WSPP1012025: 10 gauge, 12 TPI, 25mm long, 9.5mm pan head, Phillips #2 drive.
- AISI 304 (A2) stainless steel. For general fixing into timber and hardwood in external areas, and listed as ideal for high pollution and corrosive conditions.
- Working pullout load in 20mm thick timber: 800N in F7 pine and 850N in F27 hardwood. Working loads include a factor of safety of 2.5 for timber; mean and characteristic values are also listed, all from laboratory tests.
- Torsional strength 5.4Nm.
- Install with a cordless screwdriver at 2,200 to 3,000RPM and a Phillips #2 bit, with firm pressure. Do not over-tighten; impact drivers are not recommended.
Who it helps: Builders fixing timber outdoors or in polluted or corrosive areas.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.