Hobson performance data
Metal Stitching Screw, Flange Hex Head and Seal 8-15: Performance Data
Hobson's two-page performance data for the DRiLLX metal stitching screw with flange hex head and seal, 8 gauge, 15 TPI, part T9PN4SH0815012. It is a self drilling needle point screw for general fixing of lightweight steel and stitching thin gauge sheet metal.
What this covers
- Applications
- Pull-out values
- Drill point test
- Mechanical properties
- Size
- Installation
For Needle Point Screw.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- One size: T9PN4SH0815012 (8 gauge, 15 TPI, 12mm long), 1/4 inch hex drive, packs of 1,000.
- C1022 hardened steel with a class 4 finish.
- Working pull-out load in 0.55mm G550 steel: 200N (mean 650N). Lab results with a safety factor of 2.5 for steel already included.
- Drill point test: it drilled 0.55mm G550 at 2,200rpm under a 13kg load in no more than 1.5 seconds (1.0 second average). Torsional strength 4.4Nm.
- Install with a cordless screwdriver at no more than 2,500rpm, with firm steady pressure, and do not over-tighten. Impact drivers are not recommended. Recommended 1/4 inch hex drive bits: TXDDPNSS25045 and TXDDPNSS25065.
Who it helps: Roofers, cladders and sheet metal workers stitching thin steel sheet.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.