Hobson data sheet
Hook and Keeper Ratchet Tie Down (AS/NZS 4380): 25, 35 and 50mm Data Sheet
A two-page data sheet for Hobson's hook and keeper ratchet tie down straps, part prefix URRTPEHK, made to AS/NZS 4380. It lists the three sizes with width, length and lashing capacity, then the safety instructions and how to tension and release the ratchet.
What this covers
- Applications
- Sizes and lashing capacity
- Safety instructions
- How to tension
- How to release
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Three sizes: 25mm x 5m with 750kg lashing capacity, 35mm x 6m with 1,500kg, and 50mm x 9m with 2,500kg.
- Polyester webbing with protective sleeves; steel ratchet, hook and keeper, zinc yellow finish. Complies with AS/NZS 4380.
- For load restraint only. Never use a tie down for lifting.
- Do not use the strap if more than 10% of the load bearing fibres or stitching is damaged, or if the ratchet or hooks are deformed, cracked, worn or corroded.
- Keep at least 1.5 turns of webbing on the ratchet spindle when tensioned. You may twist the webbing half a turn to stop flapping, but no more, and never knot it.
- Use sleeves or corner protectors over sharp edges, keep the straps away from chemicals, and check the load weight so enough straps are used.
Who it helps: Tradies, transport operators and anyone restraining a load on a ute, trailer or truck.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.