Hobson did you know flyer
Hot Dip Galvanised Allthread Rod, Class 4.6, M8 to M64: Did You Know
A one-page Hobson Did You Know flyer on hot dip galvanised allthread rod to DIN 976, class 4.6. It lists sizes and lengths, applications and features.
What this covers
- Sizes and lengths
- Galvanising
- Applications
- Features
Applies to Threaded Rod (Allthread) and Foundation Stud.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Sizes M8 to M64 (ASMSGCM range). Most sizes come in 1m to 3m or 3.6m lengths; M27, M33, M39, M56 and M64 in 1m; short M12 and M16 lengths from 0.11m and 0.19m.
- Hot dip galvanised to AS 1214, minimum 40 microns and average 50 microns, for external use.
- Class 4.6 to DIN 976, with true pitch and flank angle for the right strength and correct minor diameter.
- Listed uses: cross bracing in steel structures, concrete anchoring and cyclone tie-down rods.
Who it helps: Builders and fabricators needing galvanised threaded rod outdoors.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.
Order the products this covers
Pick sizes and finishes on the product page, then send your list for a quote.