Hobson did you know flyer
Galvanised Timber Connectors: Joist Hangers, Multi Grips, Triple Grips and Cyclone Straps (Did You Know)
A three-page Hobson Did You Know flyer on galvanised timber connectors. It lists joist hangers, multi grips, triple grips and cyclone strap tie downs with part numbers, sizes and pack quantities.
What this covers
- Material and finish
- Applications
- Joist hangers
- Multi grips and triple grips
- Cyclone strap tie down
Applies to Cyclone Strap Tie Down, Joist Hangers, Multi Grip-Style Connector and Triple Grip-Style Connector.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Made from G300 roll formed structural steel, galvanised Z275: at least 275g of zinc per square metre, which the flyer equates to at least 20 microns per side.
- Listed uses: timber connections in flooring support beams, decking, roofing, pergolas, fencing, and masonry to timber.
- Joist hangers (HHJMGD range) in 35, 45 and 50mm widths and 90 to 190mm lengths, 1mm thick.
- Multi grip (HGMMGD) 40 x 95mm, and triple grips in right hand (HGTMGR) and left hand (HGTMGL) versions, 50 x 113mm, all 1mm thick.
- Punched cyclone strap tie downs, 25mm wide and 1.2mm thick: 382mm (GSCMG12P400) and 567mm (GSCMG12P600).
Who it helps: Deck, pergola and frame builders choosing timber connectors.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.
Order the products this covers
Pick sizes and finishes on the product page, then send your list for a quote.