Hobson did you know flyer
Drop-In PRO Anchors and Setting Tool, M6 to M20, ETA Option 7: Did You Know
A four-page Hobson Did You Know flyer for the Conxtruct Drop-In PRO anchor, the version with a lip, and the matching setting tool. It explains how the anchor works and lists features, applications, part numbers and how to read the carton label.
What this covers
- How it works
- Features and applications
- Anchor range
- Anchor with lip
- Setting tool
- Carton label and logos
Applies to Drop-In Anchor and Drop-In Anchor Setting Tool.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- A medium duty drop-in anchor: setting pushes an internal wedge down to expand it, and friction holds the load. Suits light to medium loads at shallow embedment, and can be loaded straight away.
- Zinc plated, ETA Option 7 and Part 6: approved for multiple use in cracked and non-cracked concrete for non-structural applications.
- Plain anchor M6 x 25 to M12 x 50; anchor with lip M6 x 25 to M16 x 65. The M8 and larger sizes are also assessed for fire resistance; the M6 is not.
- Setting tools M6 to M20 (EDTMSZM06 to EDTMSZM20). Using the Drop-In PRO setting tool gives a visual check that the anchor is set correctly.
- For hand rails, formwork supports, mechanical, electrical and pipe brackets, and hangers for pipes, cable trays, ducts and ceiling frames.
Who it helps: Services installers and builders fixing hangers and brackets into concrete.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.
Order the products this covers
Pick sizes and finishes on the product page, then send your list for a quote.