Hobson data sheet
Self Drilling Vertical Threaded Rod Hanger T17 for Timber: Data Sheet
Hobson's three-page data sheet for the self drilling vertical threaded rod hanger T17 for timber, part MVWMSZIM. It screws straight into timber beams or joists and takes M10 threaded rod, for pipe hanging, fire protection services and electrical conduit or cable tray.
What this covers
- Applications
- Pull-out values
- Mechanical properties
- Sizes
- Installation
- Socket to suit
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Two parts, both for M10 rod: MVWMSZIM100025 (25mm thread length, 46mm overall) and MVWMSZIM100050 (50mm thread length, 71mm overall). 14g thread, 16mm hex.
- Made from carbon steel, zinc plated (RoHS compliant).
- Working pull-out loads at 35mm embedment, with a safety factor of 2.5 for timber already included: 1,750N in F7 pine and 3,150N in hardwood. Lab results; the sheet says actual loads can differ with the timber.
- Drive it with a 16mm socket at about 1,500rpm until the body is flush with the timber, then screw the M10 rod in clockwise until fully engaged.
- Best installed with a cordless impact driver. The matching socket is MXSVS-SI (1/4 inch drive).
Who it helps: Plumbers, electricians and fire services installers hanging threaded rod under timber joists or beams.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.