Hobson data sheet
Self Drilling Vertical Threaded Rod Hanger for Steel: Data Sheet
Hobson's three-page data sheet for the self drilling vertical threaded rod hanger for metal, part MVMMSZIM100025. It is a one-piece hanger that drills itself into steel and takes M10 threaded rod hanging straight down, for pipe hanging, fire protection services and electrical conduit or cable tray.
What this covers
- Applications
- Pull-out values
- Mechanical properties
- Sizes
- Installation
- Socket to suit
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- One size: M10 internal thread (part MVMMSZIM100025), 14g drill screw, 25mm screw length, 15mm internal thread, 16mm hex.
- Made from carbon steel, zinc plated (RoHS compliant).
- Recommended steel thickness is 1.0mm to 3.0mm.
- Working pull-out loads in G450 steel, with a safety factor of 2.5 for steel already included: 900N in 1.0mm, 1,800N in 1.5mm, 2,650N in 2.0mm and 3,300N in 2.5mm plate. Lab results; the sheet says actual loads can differ with the base material.
- Nuts to suit come with the hanger. Use the supplied backing nut to lock it in place once installed.
- Best installed with a cordless impact driver, using the MXSVS-SI socket (1/4 inch drive, 16mm).
Who it helps: Plumbers, electricians and fire services installers hanging threaded rod under steel purlins or beams.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.