Hobson data sheet
Tie Wire Suspension Anchor M6 x 60: Data Sheet
Hobson's one-page data sheet for the tie wire suspension anchor, a pre-assembled one-piece anchor for suspending ceilings, attaching cable ties and supporting conduit in concrete or concrete block.
What this covers
- Applications
- Size
- Working load
- Features
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- One size: M6 x 60 (part MSTMSYM060060), 6mm drill hole, 45mm minimum drill depth, 6mm eye.
- The hole diameter equals the body diameter. Gripping lugs on the expansion clip hold it while it is set.
- Working load in tension: 0.65kN in 32MPa concrete at 30mm embedment, with 90mm minimum spacing and 45mm minimum edge distance. Safety factors of 2.5 for steel and 3.0 for concrete are already included.
- To set it, push the anchor into the hole, then pull back on it with a claw hammer.
- Carbon steel with a zinc yellow passivate finish.
Who it helps: Ceiling fixers and electricians hanging tie wire from concrete.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.