Hobson data sheet
Suspension Sleeve Anchor M6: Data Sheet
Hobson's two-page data sheet for the suspension sleeve anchor, a pre-assembled tie wire sleeve anchor for suspending ceilings, attaching cable ties and other suspension jobs. It covers the two M6 sizes, base materials, working loads and installation.
What this covers
- Applications
- Working loads
- Features
- Sizes
- Installation
For Suspension Anchor.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- For concrete, solid brick, stone and concrete block.
- Two sizes, both M6 in a 6.5mm hole with an 8mm eyelet: MSAMSYM060025 (25mm long) and MSAMSYM060035 (35mm long).
- Working load in tension in 32MPa concrete: 1.1kN at 20mm embedment (60mm spacing, 30mm edge distance) and 1.3kN at 25mm embedment (75mm spacing, 38mm edge distance). Safety factors of 2.5 for steel and 3.0 for concrete are already included.
- No setting tool needed: once in the hole, twist the suspension body to expand the sleeve and lock it.
- Carbon steel with a zinc yellow passivate finish.
Who it helps: Ceiling fixers and electricians hanging ceilings or cable runs from concrete.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.