Hobson performance data
DSE10 Sleeve Anchor, Mushroom Head with Torx Drive: Performance Data
Hobson's two-page performance data sheet for the DSE10 mushroom head sleeve anchor with a Torx drive and anti-tamper plug (MTFHDSE10 range). It lists the six sizes, washer dimensions and the setting data for through fixing into non-cracked concrete.
What this covers
- Applications
- Features
- Sizes and part numbers
- Washer dimensions
- Installation
- Setting data
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Through fixing for hand rails, lighting, signage and other fittings in public areas. The anti-tamper plug goes in after installation and is included in each pack.
- Class 8.8 steel, zinc plated. T40 Torx drive for higher torque without cam-out, with a large OD washer.
- Covered by ETA 08/0058 (Option 7) for use in non-cracked concrete, strength class C20/25 to C50/60.
- Sizes: 10mm x 80, 100 and 120 (M8) and 12mm x 80, 100 and 120 (M10), fixture thickness up to 10, 30 and 50mm.
- Setting: hole drilled 90mm deep, concrete at least 120mm thick, 70mm minimum overall embedment depth, 90mm minimum edge distance and 120mm minimum spacing.
- Installation torque 30Nm for the 10mm anchor and 50Nm for the 12mm anchor.
- Packs of 50, or 25 for the 12 x 100 and 12 x 120mm sizes.
Who it helps: Builders, electricians and sign installers fixing into concrete in public spaces.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.