Hobson performance data
DS08 Stainless Security Sleeve Anchor, Button Head with Break-off Nut: Performance Data
Hobson's two-page performance data sheet for the DS08 button head sleeve anchor with a break-off security nut, made in 304 stainless for corrosive environments (MTFHDS0810 range). It covers the three 10mm sizes, setting details and characteristic loads in concrete.
What this covers
- Applications
- Features
- Sizes and part numbers
- Setting details
- Characteristic loads
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Tamper proof security fixing: the hex nut shears away when set, leaving a smooth dome head.
- 304 stainless for corrosive environments; the sleeve is zinc plated.
- For hand rails, signage, seating and lighting in public areas, correction facilities, hospitals, parks, railway stations and stadiums.
- Three sizes, all 10mm diameter with an M8 stud: MTFHDS08010060, MTFHDS08010080 and MTFHDS08010100, packs of 50.
- Setting: 10mm hole drilled 70mm deep, concrete at least 100mm thick, 80mm minimum edge distance and spacing. Tighten with a 15mm spanner or socket; impact drivers are not recommended.
- For engineers: characteristic loads of 7.5kN pull-out and 9.5kN shear, tested in non-cracked C20/25 concrete without edge or spacing effects. These are not working loads.
Who it helps: Installers fixing into concrete in public or coastal areas who need a stainless, tamper proof anchor.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.