Hobson performance data
XBolt Bite Internal Thread Anchor, M10 and M12: Performance Data
A two-page product data sheet for the XBolt Bite internally threaded, self-tapping anchor for concrete, part MXBMSRM, in M10 and M12. It gives sizes, installation figures and working loads in tension.
What this covers
- Applications
- Sizes and part numbers
- Installation figures
- Working load in tension
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Self-tapping anchor with an internal (female) thread for suspending services from concrete: pipe supports, cable trays, fire sprinklers, suspended lighting. An alternative to a drop-in anchor, without expansion.
- Two sizes: M10 (MXBMSRM100037), 37mm long, 15mm drill hole, pack of 100; M12 (MXBMSRM120042), 42mm long, 18mm drill hole, pack of 50. Carbon steel, R1000 protective coat.
- M10 in 32MPa concrete: minimum drill depth 42mm, embedment 37mm, spacing 111mm, edge distance 56mm, working load in tension 3kN.
- M12 in 32MPa concrete: minimum drill depth 47mm, embedment 42mm, spacing 126mm, edge distance 63mm, working load in tension 4kN.
- Working loads include a factor of safety of 2.5 for steel and 3.0 for concrete. No shear loads are given.
- Install with a cordless tool; hammer setting should not be used. The bolt or rod can be adjusted or removed later.
Who it helps: Plumbers, electricians and mechanical services installers hanging rod from concrete ceilings.
Share this document
Email it to yourself
Loading…
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.