Hobson data sheet
Spaghetti Roll Continuous Plug: Data Sheet
Hobson's one-page data sheet for the spaghetti roll continuous plug: a roll of plastic plug you push into a drilled hole and cut to length. It is for light duty anchoring in concrete, solid brick, solid block and stone.
What this covers
- Applications
- Screw and nail sizes
- Sizes
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Light duty only: lights, switches and power points, brackets, shelves, letterboxes and signs.
- Use 6 or 8 gauge screws, or nails of at least 3.5mm.
- Parts: MWPSR50050 (green, 5.0mm drill, 50m roll, 6 gauge screws), MWPSR55050 (red, 5.5mm drill, 50m roll, 6 or 8 gauge) and MWPSR55005 (red, 5.5mm drill, 5m roll, 6 or 8 gauge).
- Install: drill a 5.0mm to 5.5mm hole deep enough for the screw or nail, clean out the dust, push the plug to the full depth and cut it off, then fix through the fixture into the plug.
Who it helps: Electricians, plumbers and builders doing small fixings into masonry.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.