Hobson data sheet
Round Head Nylon Nail In Anchor: Sizes and Part Numbers Data Sheet
One-page product data sheet for the round head nail in anchor, a nylon body with a drive nail that is set with a hammer. It lists uses, trades, base materials, components, and the part numbers and sizes for the steel and 304 stainless nail versions.
What this covers
- Applications and base materials
- Components
- Sizes and part numbers
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Hammering the nail slides it down the nylon body, which expands against the wall of the hole. Once set, the anchor is tamper resistant.
- For concrete, brick and stone. Uses listed: brick tie installation, signage, and pipe and conduit saddles. Trades listed: electrical and plumbing.
- Steel drive nail: 5.0mm (25 and 40mm long) and 6.5mm (25, 40 and 50mm long), parts MNRNM050025 to MNRNM0650050.
- 304 stainless drive nail: 5.0 x 25mm (MNRSM050025), 6.5 x 25mm (MNRSM0650025) and 6.5 x 40mm (MNRSM0650040).
- All sizes come in packs of 100. The installation pictures show: drill, clean the hole, tap the anchor in through the fixture, then hammer the nail home.
Who it helps: Bricklayers, electricians and plumbers fixing brick ties, saddles and signs to concrete, brick or stone.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.