Hobson performance data
Nail In Anchor, Mushroom Head: Performance Data
Hobson's one-page data sheet for the mushroom head nail in anchor: an all metal wedge style anchor set by hammering in the drive nail, which expands the body against the hole. It suits strapping, hanger systems and through fixings.
What this covers
- Applications
- Materials
- Sizes
- Working loads
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Sizes: 5mm x 22mm and 6.5mm in 25mm, 32mm, 38mm and 50mm lengths. Hole diameter 5mm for the 5mm anchor, 6.5mm for the others.
- Working loads in 32MPa concrete (safety factors 2.5 steel and 3.0 concrete included): 5mm x 22 0.8kN tension, 0.9kN shear at 19mm embedment; 6.5mm 0.9kN to 1.2kN tension and 1.2kN shear at 20mm to 25mm embedment.
- Maximum fixture thickness from 3mm (5mm x 22) to 25mm (6.5mm x 50).
- Zinc plated AISI 1018 drive nail in a zinc alloy body. Tamper resistant once installed.
- Used for signs, pipe and conduit saddles, switch boxes and tamper proof fixings.
Who it helps: Electricians, plumbers, bricklayers and builders making light fixings into concrete.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.