Hobson performance data
H-IT Splice Wedge Anchor, Light Duty: Performance Data
Hobson's two-page data sheet for the H-IT splice wedge anchor: an all metal, pre-assembled hammer-in anchor for light duty fixings to concrete, such as hangers for ceilings, cable trays and pipes, and drywall tracks and battens.
What this covers
- Applications
- Sizes
- Installation data
- Load performance
- Installation
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Two sizes, both 6mm in a 6mm hole with a 15mm head: MHWMSZSM060035 (35mm long, 50mm hole depth, up to 13mm fixture) and MHWMSZSM060065 (65mm long, 80mm hole depth, up to 35mm fixture). 7mm fixture hole.
- Sets with a hammer; no special setting tool. Tamper proof once set.
- Permissible working load in tension in 32MPa concrete, with a safety factor of 2.5 applied: 2.3kN at 22mm embedment (66mm spacing, 33mm edge distance) and 3.2kN at 30mm embedment (90mm spacing, 45mm edge distance).
- Carbon steel, zinc plated (RoHS compliant).
- Used for hanger systems, suspended ceilings, mechanical services, ventilation, suspended strapping and through fixing.
Who it helps: Ceiling, services and drywall installers making light fixings to concrete.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.