Hobson data sheet
Mungo MEA Drop In Anchor: Sizes, Spacing and Torque Data Sheet
One-page data sheet for the Mungo MEA drop in anchor, Hobson part prefix MUMMEA. It lists the features, typical uses, and a technical table of characteristic tension loads, minimum spacing, edge distance, member thickness and installation torque for each size.
What this covers
- Features
- Applications
- Technical data
- Installation
For Drop-In Anchor.
Key things to remember
The essentials from this document in plain words. Check the full document before you rely on a figure.
- Drop in anchor for metric screws and rods, set before the fixture goes on (pre installation). Finishes listed: zinc plated (over 5μm) and A4/316 stainless steel.
- Approved to ETA Option 7 for non-cracked concrete, and to ETAG 001 Part 6 for multiple use in cracked and non-cracked concrete in non-structural applications. Fire resistance up to F120 is part of the approval.
- For reinforced or unreinforced concrete. Typical uses: pipes, ventilation systems and cable trays.
- Sizes MEA M6 x 25 to M16 x 65, plus MEAr M8 x 30, M10 x 40 and M12 x 50. Short drilling depth and low edge and spacing distances.
- Installation torque: M6 4Nm, M8 8Nm, M10 15Nm, M12 35Nm, M16 60Nm.
- The tension loads in the table are characteristic values to the approval in C20/25 concrete, for engineers, not working loads. The M12 x 50/D16 figure is Mungo lab tested and not part of the approval.
Who it helps: Services installers hanging pipes, ducts and cable trays from concrete, and engineers checking approval data.
Share this document
Email it to yourself
Loading…
Related
This document is published by Hobson Engineering, who supply this range to us. We show it here in full so you can read it next to the product; the summary above is ours. Read it on this page or download the PDF. For the most current version, ask us.